Corn Puff Extruder Production Line-manufacture,factory,supplier from China

How to Improve the Puffing Degree of Corn Puff SnackIn the production process of puffed food, uneven product discharging and spraying often occur, which affects the degree and effect of puffing. Today we will share with you some troubleshooting methods.1 Control of Puff Twin-Screw ExtruderDifferent puffing extruder machine equipment vary in the degree of puffing. Generally speaking, puffing equipment can control the time, temperature and pressure of raw materials under heating and pressurization conditions, thereby affecting the puffing degree of raw materials.

The breakfast cereal production line uses advanced puffing technology to instantly puff various cereal raw materials into crispy and nutritious breakfast cereals after high temperature and high pressure treatment. The entire production line consists of ingredients, mixing, puffing, drying, seasoning, cooling, packaging and other links. It has a high degree of automation and fast production efficiency.1 Ingredients: The ingredients of corn flakes are very important.

Small Instant Noodle Production Line Successfully TestedOur new production line of instant noodles was put to the test last week. The test results were very successful.

Abalone feed production line installationIn 2022, a Korean customer purchased a 1.5-2 ton abalone feed production line. Now the production line has been put into use. The returned 2-ton abalone feed production line has also arrived at the customer's factory, and the new production line is being installed and debugged.

The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion CoefficientIn the aquatic feed industry, extruders are widely used. The reason is that the materials produced by extruders are diverse and their maturity is higher than that of pelletizers, which causes much less environmental pollution. Many manufacturers generally Only floating materials are produced. Things to note when using an extruder to produce submersible materials:1. Formula: When designing the formula, it should be noted that the starch content should be low but not absent.

Common troubleshooting of twin-screw extruderThe twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw is rotated and extruded to be transported forward. Under the action of thrust, friction, shear force and heat, a high-pressure and high-temperature difference is formed inside and outside the cavity.

Nutritional Powder Production Line Completed Installation200-250kg per hour nutritional grain flour production line installation completed. This production line uses grain flour as the main raw material, such as yam flour, konjac flour, etc., and adds various nutritional elements to produce nutritious grain flour.The equipment mainly includes powder mixing machine, vacuum conveyor, extruder, air conveyor, dryer, cooling conveyor, and crusher.What is cereal nutritional powder？Cereal nutritional powder refers to cereals as raw materials, a single variety or a combination of multiple varieti

The twin-screw extruder is a kind of multi-screw extruder. It is developed on the basis of the single-screw extruder. In the barrel of the twin-screw extruder, two screws are placed side by side. Therefore, it is called twin-screw extruder. According to the relative position of the screw, it can be divided into meshing type and non-meshing type. The meshing type can be divided into partial meshing type and full meshing type. According to the rotation direction of the screw, it can be divided into two types: co-rotating and counter-rotating.

The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust, friction, shear force and heat, a high pressure and high temperature difference is formed inside and outside the cavity. The moment the material is extruded, Instant expansion due to pressure difference.

The automated fried snack manufacturing line makes powdered uncooked substances which includes corn flour into  fried snack through the method of blending,extruding,frying,flavoring and cooling. the same production line can produce fried snacks of numerous patterns and sizes. at the equal time, the identical  fried snack may be matched with precise device manufacturing lines in keeping with precise capability.